Circular Saw plays a vital role in carpentry and craftsmanship. For beginners, a saw is just a saw when it comes to cutting.
However, the type of Saw that a carpenter uses is very crucial. To achieve a clean and precise cut in a variety of materials, you need to pick a compact circular saw.
The procedure on how to set and have a clean cut with a circular saw is simple. The article has discussed how you can effectively use a circular Saw.
What is the circular Saw?
A circular saw is an easily portable mechanical device used in ”Do It Yourself’ works in cutting various materials like plastic, metals, and tiles concrete.
The tool can cut both straight and curvilinear cuts. The device is common among professional carpenter who values precise cuts. It is effective in carrying out tasks both in the workshops and at any place that requires the cutting services.
Ten ways “how to use a circular saw”
Using a circular saw requires one to be keen to avoid chopping off their fingers.
As opposed to power saws, circular saws are somehow tricky in using to have an effective result. If you have the Saw follow these steps, and you will have the perfect cuts in your material.
Familiarize yourself with the circular Saw
Before you start using the Saw, ensure you have known it well. There are a variety of circular saw brands in the market, but almost all of them have almost similar design and features.
Understand how to handles it with front and how to control the blade movement. This will help you in handling the saw easily when you begin your work.
Wear protective gear for eye and hand protection
Taking basic precautions before you begin your work is good. Equip your hands with thick rugged gloves and goggles to protect the vulnerable areas. There are other sensitive gears you can use like ear muffs, dust musk, among others.
Measure and mark your material on where you will have the cuts
With the help of a straight ruler, carpenter’s pencil, or pen, draw a straight line on the material on each place you will like to cut.
Ensure you have measured well and at the right angle. It should be understood that circular saws are ideal for short and straight cuts.
Put the material on the saw table
Place your cutting material on the saw table and ensure that it is well supported, and it is free from any obstruction under it.
Do not use the ordinary tables because the blade might affect the surface while cutting.
Set the desired blade depth using the central lever
Blade set is what you need to set to have your cut as per your need. Pull the shoe lever that is within the two handles, allow it to move freely.
Lower or raise the blade until it rests on the materials you are cutting. The ideal blade set should be 1/8 or ¼ cm underneath the material. The correct blade cut set will allow you to have a clean-cut and reduce the Saw’s friction.
Pivot scale adjusting
For beveled cuts, you need to twist the knob of the saw in a counterclockwise to unlock the blade’s scale.
Slide the scale to any angle indicated to have a custom cut. Turn it clockwise when you are satisfied with the angle.
Hold the Saw with both hands as you turn it on. Put the saw nose on the lines drawn and slowly moves it.
This should not be forced but done regularly when it begins to cut. Give the machine enough time in order to have a clean crosscut.
Cutting without a sawhorse
Times one night to have a cut with the Saw without using sawhorse. In this case, put the material on a sturdy like cinder blocks, bricks surface as you begin your cutting.
Ensure that you have balanced the material with the surface. Once all is set, you can use the circular Saw on the gravity lines you draw on the material.
When you are cutting wood, you can have a little margin on your line for an error. The cut is slightly outside the line and does a perfect finishing by planning the wood down.
This trick is only usable to woods, but with the other material, you need to follow the exact line drawn. Gently push the Saw with a slight force as it cuts across the material. Do not place you’re your fingers on the trigger when cutting, always be careful.
Circular Saw unplug
Once you are done with your cut, confirm if the blade guard as locked as required. Once all it is okay, unplug the Saw from power and store it for the next use.
1. How to change circular saw blade?
Blade changing is easy. You need to unscrew the nut at the center of the Saw. Once you have done this, remove the old blade and install the new one. Ensure it is well fixed before you tighten the nut.
2. What is the best mini circular saw brands
Several circular saw brands are ideal. It all depends on your needs. You always need to check on the features plus other factors to ensure you have chosen the best one.
3. Where can I use the circular Saw?
Circular saws are used in the various project more, especially that require quick cuts on the wood.
The Saw is easily portable and can be set with ease when it comes to using on the wood. Carpenters mostly use it in having fine cuts at their preferred angles.
Learning how to use a circular saw is important. As we have seen, the Saw is very easy to use but requires one to be a little bit careful.
Various circular saw brands are available in the market, but they have design and features that seem to be the same. Before you begin using your Saw, it is good to understand how it looks and works.
Leave a Reply